High-performance graphene-based electrochemical capacitors that maintain excellent electrochemical attributes under high mechanical stress, have been developed by researchers at UCLA’s Department of Chemistry and Biochemistry, the Department of Materials Science and Engineering, and the California NanoSystems Institute.
Using electrochemical capacitors (ECs) as energy storage devices would be useful because they charge and discharge faster than batteries, yet they are still limited by low energy densities, only a fraction of the energy density of batteries.
An EC that combines the power performance of capacitors with the high energy density of batteries would represent a significant advance in energy storage technology. This requires new electrodes that not only maintain high conductivity but also provide higher and more accessible surface area than conventional ECs that use activated carbon electrodes.
The researchers used a standard LightScribe DVD optical drive to produce such electrodes. The electrodes are composed of an expanded network of graphene — a one-atom-thick layer of graphitic carbon — that shows excellent mechanical and electrical properties as well as exceptionally high surface area.
The process is based on coating a DVD disc with a film of graphite oxide that is then laser treated inside a LightScribe DVD drive to produce graphene electrodes.
‘Typically, the performance of energy storage devices is evaluated by two main figures, the energy density and power density. Suppose we are using the device to run an electric car — the energy density tells us how far the car can go a single charge whereas the power density tells us how fast the car can go,’ say the research tem, ‘here, devices made with Laser Scribed Graphene (LSG) electrodes exhibit ultrahigh energy density values in different electrolytes while maintaining the high power density and excellent cycle stability of ECs. Moreover, these ECs maintain excellent electrochemical attributes under high mechanical stress and thus hold promise for high power, flexible electronics.’
“Our study demonstrates that our new graphene-based supercapacitors store as much charge as conventional batteries, but can be charged and discharged a hundred to a thousand times faster,” said Richard B. Kaner, professor of chemistry & materials science and engineering.
“Here, we present a strategy for the production of high-performance graphene-based ECs through a simple all solid-state approach that avoids the restacking of graphene sheets,” said Maher F. El-Kady, the lead author of the study and a graduate student in Kaner’s lab.
The research team has fabricated LSG electrodes that do not have the problems of activated carbon electrodes that have so far limited the performance of commercial ECs.
First, The LightScribe laser causes the simultaneous reduction and exfoliation of graphite oxide and produces an open network of LSG with substantially higher and more accessible surface area.
This results in a sizable charge storage capacity for the LSG supercapacitors. The open network structure of the electrodes helps minimize the diffusion path of electrolyte ions, which is crucial for charging the device. This can be accounted for by the easily accessible flat graphene sheets, whereas most of the surface area of activated carbon resides in very small pores that limit the diffusion of ions. This means that LSG supercapacitors have the ability to deliver ultrahigh power in a short period of time whereas activated carbon cannot.
Additionally, LSG electrodes are mechanically robust and show high conductivity (>1700 S/m) compared to activated carbons (10-100 S/m). This means that LSG electrodes can be directly used as supercapacitor electrodes without the need for binders or current collectors as is the case for conventional activated carbon ECs.
Furthermore, these properties allow LSG to act as both the active material and current collector in the EC. The combination of both functions in a single layer leads to a simplified architecture and makes LSG supercapacitors cost-effective devices.
Commercially available ECs consist of a separator sandwiched between two electrodes with liquid electrolyte that is either spirally wound and packaged into a cylindrical container or stacked into a button cell. Unfortunately, these device architectures not only suffer from possible harmful leakage of electrolytes, but their design makes it difficult to use them for practical flexible electronics.
The research team replaced the liquid electrolyte with a polymer gelled electrolyte that also acts as a separator, further reducing the device thickness and weight and simplifying the fabrication process as it does not require special packaging materials.
In order to evaluate under real conditions the potential of this all solid-state LSG-EC for flexible storage, the research team placed a device under constant mechanical stress to analyze its performance. Interestingly enough, this had almost no effect on the performance of the device.
“We attribute the high performance and durability to the high mechanical flexibility of the electrodes along with the interpenetrating network structure between the LSG electrodes and the gelled electrolyte,” explains Kaner. “The electrolyte solidifies during the device assembly and acts like glue that holds the device components together.”
The method improves the mechanical integrity and increases the life cycle of the device even when tested under extreme conditions.
Since this remarkable performance has yet to be realized in commercial devices, these LSG supercapacitors could, says UCLA, lead the way to ideal energy storage systems for next generation flexible, portable electronics.
Comments powered by Disqus
View all news
Latest Blog posts
Infineon Micro Avoids Philips Patent05 Mar 2013Tablet Repairability list, brickbats and bouquets05 Mar 2013Graphene Supercapacitors Could Revolutionise Energy Storage05 Mar 2013C’mon Nokia, Do Something Witty05 Mar 2013View all blogs
Share the content
Microcontrollers address Color Kinetics LED lighting patentPosted:
10:34 05 Mar 2013UCLA graphene supercapitors could revolutionise storagePosted:
10:38 05 Mar 2013Flexi-battery stretches 300%Posted:
11:25 01 Mar 2013January semi sales up 4%Posted:
01:00 05 Mar 2013
» MAIN INDEX
» Arrow Electronics
» Avnet Abacus
» Avnet Memec
» Avnet Silica
» Digi Key
» EBV Elektronik
» MSC Gleichmann UK
Jam Recruitment: R & D EngineerPosted:
18:48 05 Mar 2013Jam Recruitment: Algorithms/Software EngineerPosted:
18:43 05 Mar 2013Jam Recruitment: DSP Software Enigneer / DSP SpecialistPosted:
18:40 05 Mar 2013Jam Recruitment: Software EngineerPosted:
18:35 05 Mar 2013
Products & Services
Terms and Conditions
© Metropolis International Group Ltd.
The Latest Electronics News
Communications, EDA and IP, Embedded Systems, Legislation, Power
Analogue & Discretes, Displays and Opto, Memory, Micros & DSP, Passives, FPGAs & Asics
Materials R & D, Process R & D, Device R & D
Distribution, Viewpoints, IT, Market Research
Manufacturing, Test & Measurement
Analogue ICs, Bus Systems & SBCs, Emech & Enclosures, Memory, Passives, Connectors, Digital ICs, Discretes,
Displays, DSPs, FPGA/PLD, Asics, Micros, Power Supplies, RF & Opto, Sensors, Software, Test & Measurement
Diary Dates, Electronica, Elektras