MIT tracks electrons in topological insulators

MIT researchers have found a way to observe how electrons move in the class of materials known as topological insulators. Topological insulators are exotic materials, discovered just a few years ago, in which the electrons demonstrate unusual behaviour. MIT’s techniques…

MIT researchers have found a way to observe how electrons move in the class of materials known as topological insulators. Topological insulators are exotic materials, discovered just a few years ago, in which the electrons demonstrate unusual behaviour. MIT’s techniques could help unlock the mysteries of exactly how electrons move and react in these materials, opening up new possibilities for harnessing them.

For the first time, the MIT team has managed to create 3-D “movies” of electron behaviour in a topological insulator, or TI. The movies can capture vanishingly small increments of time — down to the level of a few femtoseconds – so that they can catch the motions of electrons as they scatter in response to a very short pulse of light.

Electrons normally have mass, just like many other fundamental particles, but when moving along the surface of TIs they move as if they were massless, like light — one of the extraordinary characteristics that give these new materials such promise for new technologies.The dramatic new results are published this week in the journal Physical Review Letters, in a paper by MIT graduate student Yihua Wang, assistant professor of physics, Nuh Gedik and six other researchers.TIs are a class of materials with seemingly contradictory characteristics: The bulk of the material acts as an insulator, almost completely blocking any flow of electrons. But the surface of the material behaves as a very good conductor, like a metal, allowing electrons to travel freely. In fact, the surface is even more conductive than normal metals — allowing electrons to travel at almost the speed of light and to be unaffected by impurities in the material, which normally hinder their motion.

Because of these characteristics,TIs are seen as a promising new material for electronic circuits and data-storage devices. But developing such new devices requires a better understanding of exactly how electrons move around on and inside the TI, and how the surface electrons interact with those inside the material.Last year, Gedik, Wang and others published a paper describing a new technique that allowed them to create instantaneous three-dimensional still images of the energy, momentum and spin of electrons within topological insulators. Until then, the only way to create such 3-D images was through a slow and painstaking technique that could reveal one point at a time on the surface. The material would then be rotated slightly so that an image of the next point could be taken, and so on, gradually building up the full image.

The new technique, which enables moving 3-D images, is an application of a method called the pump-probe technique. It uses a short pulse of laser light to energize the material, causing electrons to scatter, and a second, slightly delayed pulse to illuminate it and produce an image. “The first pulse does something to the electrons, and the second pulse captures what happened,” Gedik explains.Then, the process is repeated, with the second laser pulse delayed by ever-increasing increments of just a few femtoseconds. Each resulting image shows the response of the electrons to the beam after a corresponding interval. These images can then be assembled into a movie that shows how the response changes with time.Gedik explains that the fastest imaging systems now available can produce exposures lasting hundreds of picoseconds (trillionths of a second), but the electron motions they were trying to observe happen so fast that “in about five picoseconds, everything is done already.

“By using the new technique, the researchers have already discovered interactions between a TI’s surface and bulk electrons that had never been seen before, demonstrating the power of their method to reveal new details of how TIs work. “With this 3-D movie, in real time we can visualize how one population of electrons [those on the surface] scatters into the other population [inside the material],” Gedik says. “This is very important to understand.”What Gedik and his colleagues found was that the interaction between the two is mediated by sound waves, and that this interaction happens much more intensely at high temperatures. “We can detect that the way they are exchanging energy is through sound waves,” he says.Hundreds of potential applications for TI materials have already been proposed, Gedik says, including new kinds of magnetic storage devices to replace today’s hard disks. The proposals are based on the behaviour of the surface electrons, but those within the material are always present as well, he says, “so you really need to understand how they interact. This will guide the future work.”The MIT research was supported by the U.S. Department of Energy’s Office of Basic Energy Sciences, the Army Research Office and the National Science Foundation.

Please enable JavaScript to view the comments powered by Disqus.
Comments powered by Disqus

Related Articles

MIT’s biolab balls26 Sep 2012MIT tracks electrons in topological insulators19 Sep 2012Darpa’s worm10 Aug 2012MIT develops ‘Tensor’ compressive displays for glasses-free 3D16 Jul 2012View all news

Latest Blog posts

Ed Squares The Press15 Oct 2012Only Connect: 3M growing Twin Axial cable range15 Oct 2012Japanese Solution For Renesas15 Oct 2012Sign up for the Gadget Master newsletter12 Oct 2012View all blogs

‘);

‘);

Industry Resources

Share the content

Most Viewed

Raspberry Pi gets more memory for Android 4.0 Posted:
10:11 15 Oct 2012ST considering break-upPosted:
13:21 12 Oct 2012AMD to sack 20% of workforcePosted:
07:00 15 Oct 2012Japanese solution for RenesasPosted:
08:00 15 Oct 2012
Products

»   MAIN INDEX
»   Acal
»   Anglia
»   Arrow Electronics

»   Avnet Abacus

»   Avnet Memec
»   Avnet Silica
»   Digi Key
»   EBV Elektronik
»   Farnell
»   Future
»   Mouser
»   MSC Gleichmann UK
»   RS

Latest Jobs

Jam Recruitment: AX Business AnalystPosted:
23:00 15 Oct 2012Jam Recruitment: AX DeveloperPosted:
23:00 15 Oct 2012European Recruitment Ltd: Hardware Design Engineer (RTL)Posted:
17:31 15 Oct 2012Jam Recruitment: Test Engineer – Aerospace and Defence SectorPosted:
17:06 15 Oct 2012

‘);

‘);

Products & Services
Email Newsletters
RSS
Blogs
Digital Magazine
Industry Resources
Company Directory
Videos
Subscribe
Media Centre
Terms and Conditions
Disclaimer
Privacy Policy
Site Map
Contact Us

© Metropolis International Group Ltd.

The Latest Electronics News

Design
Communications, EDA and IP, Embedded Systems, Legislation, Power

Components
Analogue & Discretes, Displays and Opto, Memory, Micros & DSP, Passives, FPGAs & Asics

Research
Materials R & D, Process R & D, Device R & D

Business
Distribution, Viewpoints, IT, Market Research

Production
Manufacturing, Test & Measurement

Products
Analogue ICs, Bus Systems & SBCs, Emech & Enclosures, Memory, Passives, Connectors, Digital ICs, Discretes,
Displays, DSPs, FPGA/PLD, Asics, Micros, Power Supplies, RF & Opto, Sensors, Software, Test & Measurement

Events
Diary Dates, Electronica, Elektras