High-capacity MOF shows clean fuel promise

Vehicles powered by natural gas are cleaner than those running on petrol, and are of increasing interest to those living in countries that have to import oil.  But the high pressures at which gas must be stored require expensive materials…

Vehicles powered by natural gas are cleaner than those running on petrol, and are of increasing interest to those living in countries that have to import oil.  But the high pressures at which gas must be stored require expensive materials and distribution infrastructures, as well as radically different vehicle designs.

Metal organic frameworks (MOFs) could be the answer to the problem. These materials – which comprise metal ions connected by organic linkers – are able to store high quantities of gas at lower pressures than are required by traditional gas cylinders, for example. But their low capacity and the scale on which they can be synthesised have prevented their practical use so far.

However, a collaboration between US scientists could change this. Omar Farha, Randall Snurr and Joseph Hupp at Northwestern University in Evanston, Illinois, and Taner Yildirim of the National Institute of Standards and Technology in Gaithersburg, Maryland have synthesised a MOF in gram-scale quantities that has 67% of the deliverable storage density of gas cylinders, but at only a quarter of the pressure.‘What this [reduction in pressure] is going to do is reduce the compression cost ,’ explains Farha. ‘The infrastructure will become cheaper – you won’t need compressors to compress natural gas up to 250 bar.’Farha’s research team designed the material, dubbed NU-125, by considering the criteria that were needed. The proposed structure consisted of copper ions connected by new hexa-carboxylic acid linkers, which provides greater porosity than MOFs made with conventional linkers. A computer simulation was then used to confirm that the material could deliver the required properties before scaling up and synthesis was carried out.The researchers tested the material’s stability by repeated adsorption–desorption cycling over the course of a month, which revealed no degradation in performance. Isotherms were also measured on larger scales, using a gram of the MOF, and the physical properties found to be the same. ‘This suggests the material can be activated very well,’ comments Farha.Russell Morris, of the University of St Andrew’s, UK, praises the researchers’ achievements: ‘I think the capacity is pretty much getting near to being enough,’ he says, but warns that the researchers need to explore the effects of impurities and stability over longer periods. Farha agrees, revealing this is the group’s next step, along with optimisation of the deliverable gas capacity even further.

ReferencesC E Wilmer et al, Energy Environ. Sci., 2013, DOI: 10.1039/C3EE24506C

Related Content

MOF smashes gas storage ceiling

28 August 2012 Research

Recording-breaking metal organic frameworks adds weight to idea that they can mop up much more gas than previously thought

Up in the air

23 November 2012 Feature

Philip Ball looks at the recent progress in lithium–air battery research – has it stalled?

Most Read

Supercharging methanol for fuel cells

27 February 2013 Research

Ruthenium-based pincer catalyst can extract hydrogen from methanol, making it a better choice to generate clean energy

Polymer production line runs on DNA

3 March 2013 Research

Enzyme-less system can produce a huge library of synthetic polymers that could catalyse chemical reactions or target disease

Most Commented

Elusive water dimer detected at last

7 March 2013 Research

Scientists in Russia have observed water dimers in atmospheric conditions for the first time, following 40 years of research

Pesticides can kill frogs in hours

29 January 2013 Research

Typical spraying of fields with commonly used pesticides is enough to cause the death of frogs