Nanomechanical resonator arrays: a springboard to single-molecule detection

Arrays of tiny nanometer-sized cantilevers can be coated with antibodies to capture viruses, here represented as red spheres. Such nanomechanical resonator arrays can be used as highly sensitive chemical and biological sensors. (Image courtesy Purdue University. Generated by Seyet, LLC.)
Nanometer-sized cantilevers can be coated with antibodies to capture viruses, here represented as red balls. Large arrays of such nanomechanical resonators can be used as highly sensitive chemical and biological sensors. (Image: Purdue University, generated by Seyet, LLC.)

What?

Nanomechanical resonators are flexible nanoscale structures resembling tiny diving boards or harmonica reeds. Like all cantilevers (beams anchored at only one end), they vibrate most strongly at specific resonant frequencies. The small size of a nanomechanical resonator means that the adherence of any foreign matter to its surface can potentially alter its resonant frequency. Monitoring this frequency shift permits biological and chemical agents to be detected with single-molecule resolution, providing better sensitivity than that found in commercially available mass spectrometers.

In order to make nanomechanical resonators practical for real-world sensing applications, the dual requirements of high sensitivity and rapid detection must be met.  The low probability that a target molecule will land on the device’s small sensing area limits robustness and performance, and in the past researchers have resorted to the impractical solution of aiming a high-volume chemical stream directly at an individual resonator[1]

An alternate approach is to construct a large array of resonators, thus eliminating the need for pinpoint physical targeting.  An early demonstration of this concept was provided by the Millipede project at IBM Zurich (although the thousands of microcantilevers in that array were designed not to sense molecules but to implement a data storage system).[2]

Why?

The high sensitivity and small size of nanomechanical resonators enables large-scale integration and device miniaturization and promises a new generation of portable biological and chemical sensors. Potential applications of nanomechanical resonator array-based sensors include breath analyzers, industrial and food processing, national security and defense, and food and water quality monitoring. [3]

Nanomechanical resonator sensors have proven to be particularly successful in biological and medical applications, with reports of their use in the detection of biomolecules such as DNA and RNA, bacteria such as Escherichia coli and Salmonella enterica, and even tumor cells. One example used resonators coated with a nutrient layer in which the growth of E. coli was revealed by continuous changes in the resonant frequency. [4]

In another study, virus researchers at Purdue University found that coating resonators with antibodies changed the frequency in unexpected ways. The effect turned out to be due to a complex influence of resonator area on coating density. [5]

Who, Where, and When?

In 2003, Ming Su, Shuyou Li, and Vinayak P. Dravid at the Department of Materials Sciences and Engineering and Institute for Nanotechnology, Northwestern University, described the use of multiple resonators to detect multiple DNA sequences simultaneously.[6]

Last year James Sioss and colleagues at Pennsylvania State University reported the use of nanowire resonators and gold nanoparticles to detect specific RNA markers of circulating tumor cells.[7]

Now researchers at the Alliance for Nanosystems VLSI, a joint venture of Caltech’s Kavli Nanoscience Institute and CEA-LETI’s MINATEC, Grenoble, have created arrays consisting of thousands of individual nanoresonators at densities of up to six million resonators per square centimeter.[8] When coated with a polymer having a high affinity for the chemical warfare agent diisopropyl methylphosphonate, the device successfully detected 1 ppb of the gas within two seconds. Nanosensor arrays of this sort could form the basis of a gas chromatograph/mass spectrometer on a chip.[1]

How?

In general, nanomechanical resonators are fabricated either by etching three-dimensional structures into a silicon wafer or by building up layers on the surface of a polymer-based carrier substrate (surface micromachining). Other technologies include ZnO or rhodium nanowires, carbon nanotubes, and graphene.

The massive arrays produced by the Kavli-MINATEC team were created using standard lithographic methods for mass-producing computer chips. Complex electrical couplings between the resonators ensured good sensor performance even if lithographic defects, mechanical damage, or electrostatic discharge caused individual resonators to fail.

To achieve the accurate and fast readout required, various technologies exist, including: optical (laser beam deflection, as in the Penn State experiment); capacitive (capacitance change between the resonator and a parallel plate); piezoelectrical (change in electrical potential due to mechanical stress); and piezoresistive (change in resistance due to mechanical stress, as in the Kavli-MINATEC nanoresonator array).

It may be possible to push the limits of measurement beyond single-molecule sensing. Due to their small scale, nanomechanical resonators exhibit quantum mechanical behavior when laser-cooled to their quantum ground state.[9] In certain regimes, therefore (at near-zero temperatures and sufficiently high resonance frequencies), large arrays of these devices could in principle be used to achieve even higher-resolution measurements.[10]

But?

Some fundamental mechanisms of cantilever sensors are not yet completely understood. For example, at this mesoscopic scale, random collisions with gas molecules can result in significant thermomechanical noise.[11] While the input of multiple sensors may assist in noise detection and suppression, much work remains to be done in characterizing and tracing the origin of surface stress changes.

Literature
K. Eoma et al., Nanomechanical resonators and their applications in biological/chemical detection: nanomechanics principlesPhys. Rep. 503, 2011.
I. Bargatin et al., Large-scale integration of anoelectromechanical systems for gas sensing applicationsNano Lett., 2012.
Background
Mircea Dragoman & Daniela Dragoman, Nanoelectronics Principles and Devices, Artech House (2008)

 

References

  1. Large-scale production of nanosensors, February 2012.
  2. IBM Millipede project, Accessed February 2012.
  3. Microcantilevers detect chemical and biological agents, February 2012.
  4. A. Boisen, S. Dohn, S. S. Keller, S. Schmid and M. Tenje, Cantilever-like micromechanical sensors, Rep. Prog. Phys. 74", article number = "036101, 2011.
  5. A. K. Gupta, P. R. Nair, D. Akin, M. R. Ladisch, S. Broyles, M. A. Alam, and R. Bashir, Anomalous resonance in a nanomechanical biosensor, Proc. Nat'l Acad. Sci. 103, p. 13362–13367, 2006.
  6. Ming Su, Shuyou Li, and Vinayak P. Dravid,, Microcantilever resonance-based DNA detection with nanoparticle probes, Appl. Phys. Lett., p. 3562–3564, 2003.
  7. J. A. Sioss, R. B. Bhiladvala, W. Pan, M. Li, S. Patrick, P. Xin, S. L. Dean, C. D. Keating, T. S. Mayer, G. A. Clawson, Nanoresonator chip-based RNA sensor strategy for detection of circulating tumor cells: response using PCA3 as a prostate cancer marker, Nanomed., p. 1017–1025, August 2012.
  8. The Alliance for Nanosystems VLSI., Acessed February 2012.
  9. J. Chan, T. P. M. Alegre, A. H. Safavi-Naeini, J. T. Hill, A Krause, S. Gröblacher, M. Aspelmeyer, and O. Painter, Laser cooling of a nanomechanical oscillator into its quantum ground state, Nature, p. 89–92, 6 October 2011.
  10. J. Chan, T. P. M. Alegre, A. H. Safavi-Naeini, J. T. Hill, A Krause, S. Gröblacher, M. Aspelmeyer, and O. Painter, Quantum measurements using nanomechanical resonators, 25 March 2012.
  11. G. Palasantzas, Limit to mass sensitivity of nanoresonators with random rough surfaces due to intrinsic sources and interactions with the surrounding gas, J. Appl. Phys., p. 016107, 9 July 2008.

Books

Jobs

Quality Officer at Minnesota Department of Human Services Recruitment
Expires: 01/29/2021 Employer: Minnesota Department of Human Services Recruitment
Intelligence Analyst at Minnesota Department of Human Services Recruitment
Expires: 01/21/2021 Employer: Minnesota Department of Human Services Recruitment
Plant Health Safeguarding Specialist, PPQ Technician, and various other entry-level positions at U.S. Department of Agriculture's Animal and Plant Health Inspection Service (APHIS)
Expires: 01/20/2021 Employer: U.S. Department of Agriculture's Animal and Plant Health Inspection Service (APHIS)
Behavioral Health Specialist - Qualified Mental Health Professional (QMHP) at Oregon Youth Authority
Expires: 01/29/2021 Employer: Oregon Youth Authority
Renewable Energy Engineer at California Public Utilities Commission
Expires: 01/24/2021 Employer: California Public Utilities Commission
Associate Toxicologist at California Department of Pesticide Regulation
Expires: 01/30/2021 Employer: California Department of Pesticide Regulation
Informatics Liaison & Public Health Informatician(Job Id 15513) at South Dakota State Government
Expires: 01/29/2021 Employer: South Dakota State Government - Department of Health
IC Design Engineer Internship at Power Integrations
Expires: 02/27/2021 Employer: Power Integrations
Physical Security Command Center Technician at Van Andel Institute
Expires: 02/14/2021 Employer: Van Andel Institute
Epidemiologist I(Job Id 15512) at South Dakota State Government
Expires: 01/22/2021 Employer: South Dakota State Government - Department of Health
Management Analyst I - Non-Merit at Baltimore County Government
Expires: 01/22/2021 Employer: Baltimore County Government
Assignment Assistant for Central Assignment Office - Non-Merit at Baltimore County Government
Expires: 01/27/2021 Employer: Baltimore County Government
Environmental Specialist - Science and Engineering Division at City of Tacoma
Expires: 02/02/2021 Employer: City of Tacoma
Probation Officer I - Adult Probation at Franklin County PA
Expires: 01/29/2021 Employer: Franklin County PA
Legal Secretary at California Department of Toxic Substances Control (DTSC)
Expires: 01/26/2021 Employer: California Department of Toxic Substances Control (DTSC)
IT Associate / Project Analyst at California Department of Toxic Substances Control (DTSC)
Expires: 01/22/2021 Employer: California Department of Toxic Substances Control (DTSC)
Manager Braille & Talking Book(Job Id 15491) at South Dakota State Government
Expires: 02/04/2021 Employer: South Dakota State Government - Department of Education
Assistant Electrical Chief (Operations & Policy Analyst 3) at Oregon Department of Consumer and Business Services
Expires: 01/27/2021 Employer: Oregon Department of Consumer and Business Services
Behavioral Health Senior Clinician at Fairfax County Government
Expires: 01/23/2021 Employer: Fairfax County Government - Fairfax County Human Resources
Behavioral Health Specialist II - Residential Treatment & Detox Services at Fairfax County Government
Expires: 01/23/2021 Employer: Fairfax County Government - Fairfax County Human Resources
Deputy Director Community Services Board / Administrative Operations at Fairfax County Government
Expires: 01/30/2021 Employer: Fairfax County Government - Fairfax County Human Resources
Occupational Safety Consultant (Occupational Safety Specialist 3) at Oregon Department of Consumer and Business Services
Expires: 02/02/2021 Employer: Oregon Department of Consumer and Business Services
Deputy Director, Department of Public Works and Environmental Services, Capital Facilities at Fairfax County Government
Expires: 01/30/2021 Employer: Fairfax County Government - Fairfax County Human Resources
Human Resources Intern at Virginia State Corporation Commission
Expires: 02/26/2021 Employer: Virginia State Corporation Commission
Member and Committee Vacancies at U.S. Congress
Expires: 01/27/2021 Employer: U.S. Congress
Grants and CJAB Coordinator at Franklin County PA
Expires: 01/28/2021 Employer: Franklin County PA
Engineering Technician I at City of Carlsbad
Expires: 02/09/2021 Employer: City of Carlsbad
Postdoctoral Fellow- Biologics Optimization: CHO Cell Engineering for Targeted Integration at Amgen
Expires: 02/26/2021 Employer: Amgen - Fulltime Recruiting
Associate, Data Strategy at Tempus, Inc.
Expires: 01/29/2021 Employer: Tempus, Inc.
Engineer I - II (Region Bridge Engineer) (Job Id 15468) at South Dakota State Government
Expires: 02/05/2021 Employer: South Dakota State Government - Department of Transporation
Trauma Program Manager/EMS Specialist (Registered Nurse)(Job Id 15477) at South Dakota State Government
Expires: 01/26/2021 Employer: South Dakota State Government - Department of Health
Electronic Industrial Controls Mechanic at U.S. Mint
Expires: 02/01/2021 Employer: U.S. Mint